欢迎访问ic37.com |
会员登录 免费注册
发布采购

ELM409P 参数 Datasheet PDF下载

ELM409P图片预览
型号: ELM409P
PDF下载: 下载PDF文件 查看货源
内容描述: 多才多艺的去抖电路 [Versatile Debounce Circuit]
分类和应用:
文件页数/大小: 8 页 / 51 K
品牌: ELM [ ELM ELECTRONICS ]
 浏览型号ELM409P的Datasheet PDF文件第1页浏览型号ELM409P的Datasheet PDF文件第2页浏览型号ELM409P的Datasheet PDF文件第4页浏览型号ELM409P的Datasheet PDF文件第5页浏览型号ELM409P的Datasheet PDF文件第6页浏览型号ELM409P的Datasheet PDF文件第7页浏览型号ELM409P的Datasheet PDF文件第8页  
ELM409  
Absolute Maximum Ratings  
Storage Temperature....................... -65°C to +150°C  
Note:  
Stresses beyond those listed here will likely damage  
the device. These values are given as a design  
guideline only. The ability to operate to these levels  
is neither inferred nor recommended.  
Ambient Temperature with  
Power Applied....................................-40°C to +85°C  
Voltage on VDD with respect to VSS............0 to +7.5V  
Voltage on any other pin with  
respect to VSS........................... -0.6V to (VDD + 0.6V)  
Electrical Characteristics  
All values are for operation at 25°C and a 5V supply, unless otherwise noted. For further information, refer to note 1 below.  
Characteristic  
Minimum Typical  
Maximum Units  
Conditions  
Supply Voltage, VDD  
VDD rate of rise  
3.0  
5.0  
5.5  
V
see note 2  
see note 3  
0.05  
V/ms  
mA  
Average Supply Current, IDD  
1.0  
2.4  
4.0  
Input (pin 5)  
Schmitt trigger  
thresholds  
rising  
2.9  
1.5  
1.6  
1.0  
0.3  
4.2  
25  
V
V
VDD = 5.0V  
falling  
rising  
falling  
1.0  
0.6  
Input (pin 5)  
Schmitt trigger  
thresholds  
2.4  
V
VDD = 3.0V  
V
Output low voltage  
Output high voltage  
Standard debounce time  
Long debounce time  
Output pulse width  
V
Current (sink) = 10 mA  
Current (source) = 10 mA  
see note 4  
V
msec  
msec  
msec  
see note 4  
500  
50  
see note 4  
Notes:  
1. This integrated circuit is produced using one of the Microchip Technology Inc.’s PIC12C5XX products as the  
core embedded microcontroller. For further device specifications, and possibly clarification of those given,  
please refer to the appropriate Microchip documentation.  
2. This spec must be met in order to ensure that a correct power on reset occurs. It is quite easily achieved  
using most common types of supplies, but may be violated if one uses a slowly varying supply voltage, as  
may be obtained through direct connection to solar cells, or some charge pump circuits.  
3. Device only. Does not include any current supplied to external circuits.  
4. The ELM409 uses an internal RC oscillator for the timing. This oscillator typically maintains an accuracy of  
2% over the allowed temperature and voltage range.  
ELM409DSA  
Elm Electronics – Circuits for the Hobbyist  
3 of 8  
< http://www.elmelectronics.com/ >