ELM334
Absolute Maximum Ratings
Storage Temperature....................... -65°C to +150°C
Note:
Stresses beyond those listed here will likely damage
the device. These values are given as a design
guideline only. The ability to operate to these levels
is neither inferred nor recommended.
Ambient Temperature with
Power Applied....................................-40°C to +85°C
Voltage on VDD with respect to VSS............0 to +7.5V
Voltage on any other pin with
respect to VSS........................... -0.6V to (VDD + 0.6V)
Electrical Characteristics
All values are for operation at 25°C and a 5V supply, unless otherwise noted. For further information, refer to note 1 below.
Characteristic
Minimum Typical
Maximum Units
Conditions
Supply Voltage, VDD
VDD rate of rise
3.0
5.0
5.5
V
see note 2
VDD = 5V, see note 3
0.05
V/ms
mA
Average Supply Current, IDD
1.0
2.4
Pushbutton
Debounce Period
Position Switches
25
msec
msec
500
see note 4
Maximum Control Pulse Width
Input low voltage
500
msec
VSS
0.15 VDD
VDD
V
V
V
V
Input high voltage
0.85 VDD
Output low voltage
0.6
Current (sink) = 8.7mA
Output high voltage
VDD - 0.7
Current (source) = 5.4mA
Notes:
1. This integrated circuit is produced with a Microchip Technology Inc.’s PIC12C5XX as the core embedded
microcontroller. For further device specifications, and possibly clarification of those given, please refer to the
appropriate Microchip documentation.
2. This spec must be met in order to ensure that a correct power on reset occurs. It is quite easily achieved
using most common types of supplies, but may be violated if one uses a slowly varying supply voltage, as
may be obtained through direct connection to solar cells, or some charge pump circuits.
3. Integrated circuit only. Does not include any LED or drive currents.
4. This is the maximum output pulse width, if the pushbutton input remains active. If the pushbutton is released
prior to this time, the output will simply follow the input.
3 of 4
ELM334DSB
Elm Electronics – Circuits for the Hobbyist
< http://www.elmelectronics.com/ >