ELM328
Absolute Maximum Ratings
Storage Temperature....................... -65°C to +150°C
Note:
These values are given as a design guideline only.
The ability to operate to these levels is neither
inferred nor recommended, and stresses beyond
those listed here will likely damage the device.
Ambient Temperature with
Power Applied....................................-40°C to +85°C
Voltage on VDD with respect to VSS..... -0.3V to +7.5V
Voltage on any other pin with
respect to VSS........................... -0.3V to (VDD + 0.3V)
Electrical Characteristics
All values are for operation at 25°C and a 5V supply, unless otherwise noted. The ELM328 is electrically identical to the
ELM327 in all respects. For further information, refer to the ELM327 data sheet, and to note 1 below.
Characteristic
Minimum Typical
Maximum Units
Conditions
Supply voltage, VDD
VDD rate of rise
4.5
5.0
5.5
V
V/ms
mA
V
see note 2
see note 3
0.05
Average supply current, IDD
Brown-out reset voltage
12
4.11
4.33
4.55
Notes: 1. This integrated circuit is based on Microchip Technology Inc.’s PIC18F2480 device. For further device
specifications, and clarification of those given, please refer to the appropriate Microchip documentation
(available at http://www.microchip.com/).
2. This spec must be met in order to ensure that a correct power on reset occurs. It is quite easily achieved
using most common types of supplies, but may be violated if one uses a slowly varying supply voltage, as
may be obtained through direct connection to solar cells or some charge pump circuits.
3. Device only. Does not include any load currents.
All rights reserved. Copyright 2008, 2010 by Elm Electronics Inc.
Every effort is made to verify the accuracy of information provided in this document, but no representation or warranty can be
given and no liability assumed by Elm Electronics with respect to the accuracy and/or use of any products or information
described in this document. Elm Electronics will not be responsible for any patent infringements arising from the use of these
products or information, and does not authorize or warrant the use of any Elm Electronics product in life support devices and/or
systems. Elm Electronics reserves the right to make changes to the device(s) described in this document in order to improve
reliability, function, or design.
2 of 2
ELM328DSB
Elm Electronics – Circuits for the Hobbyist
www.elmelectronics.com
ELM [ ELM ELECTRONICS ]
