欢迎访问ic37.com |
会员登录 免费注册
发布采购

BCM43907 参数 Datasheet PDF下载

BCM43907图片预览
型号: BCM43907
PDF下载: 下载PDF文件 查看货源
内容描述: [WICED™ IEEE 802.11 a/b/g/n SoC with an Embedded Applications Processor]
分类和应用:
文件页数/大小: 128 页 / 2500 K
品牌: CYPRESS [ CYPRESS ]
 浏览型号BCM43907的Datasheet PDF文件第1页浏览型号BCM43907的Datasheet PDF文件第3页浏览型号BCM43907的Datasheet PDF文件第4页浏览型号BCM43907的Datasheet PDF文件第5页浏览型号BCM43907的Datasheet PDF文件第6页浏览型号BCM43907的Datasheet PDF文件第7页浏览型号BCM43907的Datasheet PDF文件第8页浏览型号BCM43907的Datasheet PDF文件第9页  
Preliminary Data Sheet  
BCM43907  
WICED IEEE 802.11 a/b/g/n SoC with an  
Embedded Applications Processor  
GENERAL DESCRIPTION  
FEATURES  
The Broadcom® Ltd. BCM43907 embedded wireless  
system-on-a-chip (SoC) is uniquely suited for  
Internet-of-Things applications. It supports all rates  
specified in the IEEE 802.11 a/b/g/n  
Key IEEE 801.11x Features  
IEEE 802.11n compliant.  
Single-stream spatial multiplexing up to  
150 Mbps.  
specifications.The device includes an ARM Cortex-  
based applications processor, a single stream IEEE  
802.11n MAC/baseband/radio, a dual-band 5 GHz  
and 2.4 GHz transmit power amplifier (PA), and a  
receive low-noise amplifier (LNA). It also supports  
optional antenna diversity for improved RF  
Supports 20/40 MHz channels with optional SGI.  
Full IEEE 802.11 a/b/g legacy compatibility with  
enhanced performance.  
TX and RX low-density parity check (LDPC)  
support for improved range and power efficiency.  
performance in difficult environments.  
On-chip power and low-noise amplifiers.  
An internal fractional nPLL allows support for a  
wide range of reference clock frequencies.  
The BCM43907 is an optimized SoC targeting  
embedded Internet-of-Things applications in the  
industrial and medical sensor, home appliance, and  
embedded audio markets. Using advanced design  
techniques and process technology to reduce active  
and idle power, the device is designed for embedded  
applications that require minimal power consumption  
and a compact size.  
Integrated ARM Cortex-R4 processor with tightly  
coupled memory for complete WLAN subsystem  
functionality, minimizing the need to wake up the  
applications processor for standard WLAN  
functions (to further minimize power consumption  
while maintaining the ability to upgrade to future  
features in the field).  
The device includes a PMU for simplifying system  
power topology and allows for direct operation from a  
battery while maximizing battery life.  
Software architecture supported by standard  
WICED SDK allows easy migration from existing  
discrete MCU designs and to future devices.  
FEATURES  
Security support:  
– WPA and WPA2 (Personal) support for  
powerful encryption and authentication.  
Application Processor Features  
ARM Cortex-R4 32-bit RISC processor.  
1 MB of on-chip SRAM for code and data.  
An on-chip cryptography core  
– AES and TKIP in hardware for faster data  
encryption and IEEE 802.11i compatibility.  
– Reference WLAN subsystem provides  
Cisco Compatible Extensions (CCX, CCX 2.0,  
CCX 3.0, CCX 4.0, and CCX 5.0).  
640 KB of ROM containing WICED SDK  
components such as RTOS and TCP/IP stack.  
17 GPIOs supported.  
– Wi-Fi Protected Setup and Wi-Fi Easy-Setup  
Q-SPI serial flash interface to support up to 40  
Mbps of peak transfer.  
Worldwide regulatory support: Global products  
supported with worldwide design approval.  
Support for UART (3), SPI or BSC master (2),  
BSC-only (2), and I2S (2) interfaces. (Broadcom  
General Features  
Supports battery voltage range from 3.0V to 4.8V  
with an internal switching regulator.  
Serial Control (BSC) is an I2C-compatible  
interface.)  
Programmable dynamic power management.  
6 Kb OTP memory for storing board parameters.  
Dedicated fractional PLL for audio clock (MCLK)  
generation.  
316-bump WLCSP  
(4.583 mm × 5.533mm, 0.2mm pitch).  
USB 2.0 host and device modes.  
SDIO 3.0 host and device modes.  
43907-DS104-R  
March 12, 2016  
Corporate Headquarters: San Jose, CA