欢迎访问ic37.com |
会员登录 免费注册
发布采购

BCM43455 参数 Datasheet PDF下载

BCM43455图片预览
型号: BCM43455
PDF下载: 下载PDF文件 查看货源
内容描述: [Single-Chip 5G WiFi IEEE 802.11ac MAC/Baseband/ Radio with Integrated Bluetooth 4.1 and FM Receiver]
分类和应用:
文件页数/大小: 159 页 / 2600 K
品牌: CYPRESS [ CYPRESS ]
 浏览型号BCM43455的Datasheet PDF文件第1页浏览型号BCM43455的Datasheet PDF文件第3页浏览型号BCM43455的Datasheet PDF文件第4页浏览型号BCM43455的Datasheet PDF文件第5页浏览型号BCM43455的Datasheet PDF文件第6页浏览型号BCM43455的Datasheet PDF文件第7页浏览型号BCM43455的Datasheet PDF文件第8页浏览型号BCM43455的Datasheet PDF文件第9页  
Preliminary Data Sheet  
BCM43455  
Single-Chip 5G WiFi IEEE 802.11ac MAC/Baseband/  
Radio with Integrated Bluetooth 4.1 and FM  
Receiver  
GENERAL DESCRIPTION  
The Broadcom® BCM43455 single-chip device  
provides the highest level of integration for a mobile or  
handheld wireless system with integrated single-  
stream IEEE 802.11ac MAC/baseband/radio,  
Bluetooth 4.1,and FM receiver.  
Using advanced design techniques and process  
technology to reduce active and idle power, the  
BCM43455 is designed to address the needs of  
mobile devices that require minimal power  
consumption and compact size. It includes a power  
management unit which simplifies the system power  
topology and allows for direct operation from a mobile  
platform battery while maximizing battery life.  
In IEEE 802.11ac mode, the WLAN operation  
supports rates of MCS0–MCS9 (up to 256 QAM) in  
20 MHz, 40 MHz, and 80 MHz channels for data rates  
of up to 433.3 Mbps. All rates specified in the IEEE  
802.11a/b/g/n are supported. Included on-chip are  
2.4 GHz and 5 GHz transmit amplifiers and receive  
low-noise amplifiers. Optional external PAs and LNAs  
are also supported.  
The BCM43455 implements highly sophisticated  
enhanced collaborative coexistence hardware  
mechanisms and algorithms, which ensure that  
WLAN and Bluetooth collaboration is optimized for  
maximum performance. In addition, coexistence  
support for external radios (such as LTE cellular and  
GPS) is provided via an external interface. As a result,  
enhanced overall quality for simultaneous voice,  
video, and data transmission on a handheld system is  
achieved.  
The WLAN section supports the following host  
interface options: an SDIO v3.0 interface that can  
operate in 4b or 1b mode, a high-speed 4-wire UART,  
and a PCIe Gen1 (3.0 compliant) interface. The  
Bluetooth section supports a high-speed 4-wire UART  
interface.  
Figure 1: Functional Block Diagram  
VIO  
VBAT  
WL_REG_ON  
PCIe  
5 GHz WLAN Tx  
5 GHz WLAN Rx  
FEM or  
T/R  
Switch  
WLAN  
Host I/F  
UART  
SDIO  
2.4 GHz WLAN Tx  
FEM or  
Optional  
T/R  
External  
Coexistence I/F  
2.4 GHz WLAN/BT Rx  
Bluetooth Tx  
COEX  
CBF  
Switch  
BCM43455  
BT_REG_ON  
UART  
I2S  
Bluetooth  
Host I/F FM  
Rx Host I/F  
PCM  
BT_DEV_WAKE  
BT_HOST_WAKE  
FM Rx  
FM Audio Out  
I2S  
FM I/F  
43455-DS109-R  
5300 California Avenue • Irvine, CA 92617 • Phone: 949-926-5000 • Fax: 949-926-5203  
November 5, 2015