Standard: .438" (11.1mm)
Radius:
Shaft Information
Special:
Diameter: .250" (6.35mm)
Length: As required.
.531" (13.5mm) available
Rotational Life
Trim:
Round, flatted, knurled or with
a screwdriver slot
Standard: 10,000 cycles
Special : 100,000 cycles
Bushing Information
Mounting Hardware
3
Diameter: /8"-32 UNEF-2A thread.
Available upon request
Lengths:
Standard bushing: /8" (9.53mm) or 1/4" (6.35mm)
3
Special Features and Constructions
Special length:
Available as required
Terminals accepting solderless push-on connectors
available.
Metric bushings available. Consult CTS.
Straight or concentric tandem constructions.
Locating Lugs
Compatible with 450 series, 15
Standard Position: Left side (with terminals down)
supplied, unless otherwise
specified.
/16" (24mm) diameter,
commercial composition variable resistor and can
be combined to make any combination of straight
or concentric tandem constructions with or without
switch.
Other Positions:
Available with right side only,
both left and right, or without lugs.
T026 Metal Shaft, Bushing Mounting, Type "T" Solder Lug Terminals
MM
DIMENSION:
INCH
C2-026 Printed Circuit Terminal Options
MM
DIMENSION:
INCH
CTS [ CTS ]
