CVS575S-500.000
SineWave
SAW Based VCSO
5×7.5mm SMD
3.3 Volts
Frequency VS Temperature
RECOMMENDED REFLOW SOLDERING PROFILE
Ramp-Up
3°C/Sec Max.
Critical Temperature
Zone
260°C
Ramp-Down
6°C/Sec.
217°C
200°C
150°C
Preheat
180 Secs. Max.
90 Secs. Max.
8 Minutes Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Conditions
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2003
Resistance to Solvents
MIL-STD-202, Method 215
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition I or J
Thermal Shock
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Moisture Resistance
Rev: M
Date: 02-Oct-2017
Page 3 of 3
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
CRYSTEK
CORPORATION
Fax: 239-561-1025 • www.crystek.com
C