CCSO-914X-1000
True SineWave
SAW Based Clock Oscillator
9×14mm SMD
5 Volt
Crystek Part Number Guide
CCSO - 914X L - 1000
#1
#2
#3
#1 Crystek Saw Oscillator
#2 Model 914X with -40/85°C Temperature Range
#3 Height (L = 0.135") (Blank = 0.210")
RECOMMENDED REFLOW SOLDERING PROFILE
Frequency vs Temperature
Ramp-Up
Critical Temperature
Zone
3°C/Sec Max.
260°C
Ramp-Down
6°C/Sec.
217°C
200°C
150°C
Preheat
180 Secs. Max.
90 Secs. Max.
8 Minutes Max.
260°C for
10 Secs. Max.
NOTE: Reflow Profile with 240°C peak also acceptable.
Parameter
Mechanical Shock
Mechanical Vibration
Solderability
Conditions
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2003
Solvent Resistance
Resistance to Soldering Heat
Thermal Shock
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition I or J
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
Moisture Resistance
Rev: P
Date: 05-Feb-2019
Page 3 of 3
Crystek Corporation reserves the right to make changes to its
products and/or information contained herein without notice.
No liability is assumed as a result of its use or application.
12730 Commonwealth Drive • Fort Myers, Florida 33913
Phone: 239-561-3311 • 800-237-3061
CRYSTEK
CORPORATION
C
Fax: 239-561-1025 • www.crystek.com
CRYSTEKMICROWAVE [ CRYSTEK CORPORATION ]
