CPC1972
Tape and Reel Packaging for 6-Pin “S” Suffix Parts
330.2 Dia
(13.00 Diaꢀ
Top Cover
Tape Thickness
0.102 Max
W = 16.00 MAX
(0.63 MAXꢀ
B0 = 10.10
(0.400ꢀ
(0.004 Maxꢀ
Top Cover
Tape
P = 12.00
(0.472ꢀ
A0 = 10.10
(0.400ꢀ
K0 = 4.90
(0.19ꢀ
K1 = 3.80
(0.15ꢀ
User Direction of Feed
Dimensions
mm
Embossed
Carrier
(inchesꢀ
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Embossment
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1972-R03
©Copyright 2009, Clare, Inc.
All rights reserved. Printed in USA.
7/20/09
5
CLARE [ CLARE ]
