Manufacturing Information
Soldering
Washing
Recommended soldering processes are limited to
Clare does not recommend ultrasonic cleaning or the
245ºC component body temperature for 10 seconds.
use of chlorinated solvents.
MECHANICAL DIMENSIONS
6 Pin Through Hole (G)
PC Board Pattern
(Top View)
8.382 ± 0.381
(0.330 ± 0.015)
7.620 ± 0.254
(0.300 ± 0.010)
2.540 ± 0.127
(0.100 ± 0.005)
6-0.800 DIA.
(6-0.031 DIA.)
3.302 ± 0.051
(0.130 ± 0.002)
7.239 TYP
6.350 ± 0.127
(0.250 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
(0.285 TYP)
6.350 ± 0.127
(0.250 ± 0.005)
0.254 TYP
(0.010 TYP)
2.540 ± 0.127
(0.100 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
5.080 ± 0.127
(0.200 ± 0.005)
6 Pin Surface Mount (“GS” Suffix)
PC Board Pattern
8.382 ± 0.381
(0.330 ± 0.015)
(Top View)
2.540 ± 0.127
(0.100 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
4.445 ± 0.127
(0.130 ± 0.002)
(0.175 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010)
6.350 ± 0.127
(0.250 ± 0.005)
8.305 ± 0.127
(0.327 ± 0.005)
0.254 ± 0.0127
0.635 ± 0.127
(0.010 ± 0.0005)
(0.025 ± 0.005)
1.905 ± 0.127
(0.075 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.499 ± 0.127
(0.059 ± 0.005)
Tape and Reel Packaging for Surface Mount Package
330.2 DIA.
(13.00 DIA.)
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
W = 16.30 MAX
(0.642 MAX)
B
= 10.10
(0.398)
0
Top Cover
Tape
K
= 3.80
(0.150)
P = 12.00
(0.472)
A
= 10.10
0
(0.398)
1
Embossment Carrier
Dimensions
mm
(inches)
K
= 4.90
(0.193)
0
User Direction of Feed
Embossment
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever,
and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property
right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support
or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make
changes to its products at any time without notice.
Specification: DS-CPC1510-R01
©Copyright 2005, Clare, Inc.
5
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
10/31/05
CLARE [ CLARE ]
