7000 Series
Miniature Toggle Switches
BUSHING FINISH
BUSHING
BUSHING
Y
.350” HIGH,
NONE NO BUSHING
D
.280” HIGH,
H
.296” HIGH, FLAT
THREADED, HIGH TORQUE
H3 .315” HIGH, KEYWAY
1,2
Y9THREADED, KEYWAY
.350” HIGH,
D8THREADED, KEYWAY
.280” HIGH, UNTHREADED,
THREADED, HIGH
1,2
TORQUE
3
UNTHREADED,
KEYWAY
FLAT
D9 .280” HIGH, UNTHREADED,
KEYWAY
No bushing choice required
with KXX, TXX actuators.
(exception: Specify CW if
splashproof bushing desired).
D8
D, D9
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
1/4-40 UNS-2A
D9 bushing standard with all terminations
except C, W-W5, Z or Z3. Add .070 (1,78) to
all actuators lengths with D, D8 & D9 bushings.
Y bushing standard with C,
W-W5, Z or Z3 terminations.
Subtract .020 (0,51) from all actuator
lengths for H3 bushing.
H4 8mm HIGH, KEYWAY, THREADED,
Y1 .378” HIGH, KEYWAY, THREADED,
Y3 8.9mm HIGH, KEYWAY,
THREADED, METRIC
Y4 .378” HIGH, FLAT, THREADED,
1,2,3
1,2,4
1,2,5
METRIC HIGH TORQUE
HIGH TORQUE
HIGH TORQUE
1/4-40 UNS-2A
1/4-40 UNS-2A
1,2
CW THREADED, SPLASHPROOF
For T & T1 actuators.
For actuators other than T, T1 and KXX.
OPTION
CODE
BUSHING FINISH
NICKEL on all bushings
except ‘D8’ satin chrome.
NONE
2
BLACK
15/32-32 UNS-2A
1/4-40 UNS-2A
1
Will withstand 12 in.-lbs. of torque with no distortion.
2
CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models
with A4 terminations.
3
D8 & H4 bushings available only with L, L1, L2, M & S actuators.
4
Y1 bushing available only with LXP, MP, PX & SP actuators.
5
IP67 Degree of protection, totally protected against
dust, full-scale voltage protection, temporary immersion.
Internal actuator seal standard.
External bushing seal available separately from
APM Hexseal, part # MFS-60064.
Y4 bushing not available with L4X actuators.
IP67 Degree of protection, totally protected
against dust, full-scale voltage protection,
temporary immersion. Internal actuator seal
and external bushing seal washer standard.
IP65 degree of protection for LXP, MP, PX
or SP with CW option.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with
threaded bushings. Black hardware is supplied when either black bushings or
actuators are specified. Optional mounting nut and locking ring styles and finishes
available.
PANEL MOUNTING
1/4 INCH BUSHING
METRIC BUSHING
15/32 INCH BUSHING
F
Without locking ring.
With standard locking ring. With small locking ring. Without locking ring.With locking ring. Without lockingring.
With standard locking ring.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
15 Jan 21
www.ckswitches.com
F–8
CK-COMPONENTS [ C&K COMPONENTS ]
