8/9
SPECIFICATIONS
Precautions
1. Avoid the application of any stress to the Resin.
2. Avoid any contact by a sharp metal nail or other materials with the Resin portion.
Resin portion (Shaded area)
3. This product should be secured firmly by fastening an M3 screw on both sides of the product.
Please be careful not to apply any stress to the product during the clamping operation.
As the connection status could vary depending on materials of outer heat sink, please check
thoroughly.
+
Recommended installation screw pitch
+
19.5mm
M3 screw
Spring washer (=<Φ6mm)
Plane washer (=<Φ6mm)
Thermal conductive silicone grease
Outer heat sink
4. A heat radiating grease should be applied to the whole rear surface so that this product can
dissipate heat as a whole. This product could be bent during the clamping operation if heat grease in
sheet form is used. For this reason, it is recommended that grease in paste form is used.
5. Handling of static electricity
ꢀ- These products are sensitive to static electricity charge.
ꢀ Please take measures to prevent any static electricity being produced such as the wearing of a
wristband or anti-static gloves when handling this product.
ꢀ- All devices, equipment and machinery must be properly grounded. It is recommended that precautio
CE's lighting inspection criterion
be taken against s
ꢀ- When inspecting the final products in which LEDs were assembled, it is recommended to check
whether the assembled LEDs are damaged by static electricity or not.
It is easy to find static-damaged LEDs by a light-on test.
*Light-on test criterion
Condition
Judgmental criterion
IF=1mA / die
No-lighting should not exist.
ꢀ- ESD tolerance of this product is 300V (HBM, based on JEITA ED-4701 Test B).
Approved Checked Drawn
Symbol
Name
CITILED
CL-L233-MC13L1
Drawing No
New implementation
Description Appro.
Apr.20.'09
Date
-
Mark
CITIZEN ELECTRONICS CO.,LTD.
Ref.CE-P412 03/09