Absolute Maximum Ratings
Supply Voltage, VIN.....................................................................................................................................................................7V
Operating Temperature Range................................................................................................................................-40¡C to 70¡C
Junction Temperature ............................................................................................................................................................150¡C
Storage Temperature Range ..................................................................................................................................-60¡C to 150¡C
Lead Temperature Soldering
Wave Solder (through hole styles only) .....................................................................................10 sec. max, 260¡C peak
Reflow (SMD styles only) ......................................................................................60 sec. max above 183¡C, 230¡C peak
ESD Damage Threshold............................................................................................................................................................2kV
Electrical Characteristics: CIN = 10µF, COUT = 22µF Tantalum, VOUT + VDROPOUT < VIN < 7V, 0¡C ² TA ² 70¡C, TJ ² +150¡C,
unless otherwise specified, Ifull load = 1.5A.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
■ Fixed Output Voltage
Output Voltage
(Notes 1 and 2)
V
INÐVOUT=1.5V
3.250
(-1.5%)
3.300
3.350
(+1.5%)
V
0²IOUT²1.5A
Line Regulation
2V²VINÐVOUT²3.7V; IOUT=10mA
VINÐVOUT=2V; 10mA ²IOUT²1.5A
0.02
0.04
0.20
0.4
%
%
Load Regulation
(Notes 1 and 2)
Dropout Voltage (Note 3)
Current Limit
IOUT=1.5A
1.05
3.1
1.4
V
VINÐVOUT=3V
IOUT=10mA
1.6
A
Quiescent Current
5.0
10.0
mA
%/W
dB
Thermal Regulation (Note 4)
30ms pulse; TA=25¡C
0.002
80
0.020
Ripple Rejection
(Note 4)
f=120Hz; IOUT=1.5A; VINÐVOUT=3V;
VRIPPLE=1VP-P
Thermal Shutdown (Note 5)
150
180
25
210
¡C
¡C
Thermal Shutdown Hysteresis
(Note 5)
Note 1: Load regulation and output voltage are measured at a constant junction temperature by low duty cycle pulse testing. Changes in out-
put voltage due to temperature changes must be taken into account separately.
Note 2: Specifications apply for an external Kelvin sense connection at a point on the output pin 1/4Ó from the bottom of the package.
Note 3: Dropout voltage is a measurement of the minimum input/output differential at full load.
Note 4: Guaranteed by design, not tested in production.
Note 5: Thermal shutdown is 100% functionally tested in production.
Package Pin Description
PACKAGE PIN #
PIN SYMBOL
FUNCTION
D2PAK
TO-220
SOT-223
1
2
3
1
2
3
1
2
3
Gnd
VOUT
VIN
Ground connection
Regulated output voltage (case).
Input voltage
2
CHERRY [ CHERRY SEMICONDUCTOR CORPORATION ]
