Based on MIL-STD-105E LEVEL II , set the acceptable level as below.
Item Critical
Major
Minor
1.00
0.10(Electrical)
0.25(Physical)
AQL(%)
0.01
Signification , Storage and Shipment
1. The signification on the bridge rectifier body can be determined by customer.
It will be 100% followed up as the instruction from customer.
2. The parts will be packed in the boxes, and the quantity in one box can be
offered by customer. The boxes will be delivered by internal express company.
3. Please keep the parts being stored in the environment with humidity lower
than 75%.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load, for capacitive load derate current by 20%.
MDD
CD2S
MDD
CD4S
MDD
CD6S
MDD
CD8S
MDD
CD10S
SYMBOLS
UNITS
MDD Catalog
Number
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
VOLTS
VOLTS
VOLTS
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Maximum DC blocking voltage
1000
Maximum average forward rectified current
IF(AV)
IFSM
Amps
1.0
at TA=75
Peak forward surge current,
35
8.3ms single half sine-wave superimposed on
rated load (JEDEC Method)
Amps
Volts
Maximum instantaneous forward voltage drop
per leg at 0.4A
VF
IR
1.0
Maximum DC reverse current
at rated DC blocking voltage
TA=25
TA=75
uA
uA
5.0
50
Typical junction capactiance per leg(Note)
Typical thermal resistance per leg
Operating temperature range
CJ
R JA
TJ
15
pF
/W
30
-55 to +150
-55 to +150
storage temperature range
TSTG
Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
NOTES:
MDD ELECTRONIC
MDD [ Chendahang Electronics Co., Ltd ]
