CTM8B54E/55E/56E/57E
EPROM-Based 8-Bit CMOS Microcontroller
3.1.5 FSR(File select register pointer): R4
Bit 0~4 are used to select up to 32 registers (address: 00h~1Fh) and Bit 5~6 are Bank Select (Bank0~3) in the
indirect addressing mode shown in Figure 2.
3.1.6 PORT A: R5
PA3:PA0, bi-directional I/O Register
3.1.7 PORT B: R6
PB7:PB0, bi-directional I/O Register
3.1.8 PORT C: R7
PB7:PB0, bi-directional I/O Register, and for MTU8B55E/57E only
3.1.9 T0MODE REGISTER: T0MODE is a write-only register and the content is listed in Table 2.
3.1.10 IOST (Control Port I/O Mode Register)
The IOST register is “write-only”
= 0, I/O pin in output mode;
= 1, I/O pin in input mode.
Indirect Addressing Mode
Bank Select
Location Select
B7
B6
B5
B4
B3
B2
B1
B0
Read 1
70h
Bank 3
50h
Bank 2
30h
00h
01h
02h
03h
04h
05h
06h
07h
08h
INAR
Timer0
PC
Bank 1
10h
Bank 0
STATUS
FSR
16 Bytes
SRAM
PORT A
PORT B
PORT C
7Fh
5Fh
3Fh
8 Bytes
SRAM
1Fh
0Fh
Bank 0
FIGURE 2. Data Memory Configuraion
* All specs and applications shown above subject to change without prior notice.
1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN, R.O.C
Tel:886-3-3529445
Fax:886-3-3521052
Email: server@ceramate.com.tw
Http: www.ceramate.com.tw
Page 5 of 23
Rev 1.1 Dec 26,2001