CP34063
1.5A,Step-Up/Down/Inverting Switching Regulators
R
V
out
V
out
8
7
6
1
2
8
7
6
1
2
R
sc
R
sc
V
in
V
in
R ³ 0 for
constant V
in
Figure 9. External Current Boost Connections for IC Peak Greater than 1.5 A
9a. External NPN Switch
9b. External NPN Saturated Switch
(See Note 8)
8. If the output switch is driven into hard saturation (non–Darlington configuration) at low switch currents (≤ 300 mA) and high driver currents
(≥30 mA), it may take up to 2.0 µs to come out of saturation. This condition will shorten the off time at frequencies ≥ 30 kHz, and is magnified
at high temperatures. This condition does not occur with a Darlington configuration, since the output switch cannot saturate. If a
non–Darlington configuration is used, the following output drive condition is recommended.
* All specs and applications shown above subject to change without prior notice.
1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN
Tel:886-3-3214525
Email: server@ceramate.com.tw
Http: www.ceramate.com.tw
Rev 1.1 Jul.18,2003
Page 6 of 10
Fax:886-3-3521052