錯誤! 連結無效。
錯誤! 連結無效。
錯誤! 連
結無效。
DATE
TYPE
MODEL
PAGE
4/5
錯誤! 連結無效。
CITATION
SUBJECT
錯誤! 連結無效。
ELECTRICAL CHARACTERISTICS
REV.
3. ELECTRICAL CHARACTERISTICS
N0.
ITEM
PERFORMANCE
TEST METHODS
Unless otherwise specified, all tests are made
under environmental conditions as given below:
3.0 Standard Conditions
Temperature:
5〜35℃
Relative humidity:
45〜85 % RH
Maximum continuous sine wave(RMS) or DC
voltage which may be applied.
Maximum Allowable
AC : ＊(2) Vrms
DC : ＊(2) V
3.1
Voltage
3.2
3.3
Varistor Voltage
Varistor Voltage
Temperature
V1mA : ＊(2) V
Voltage across the varistor measured at CmA DC.
VCmA at 85℃ － VCmA at 25℃
1
0 〜 −0.05 %/℃
×
× 100
V
CmA at 25℃
60
Coefficient
Peak voltage across the varistor with a specified
peak impulse current of 8× 20μs waveform.
The max. current within the varistor voltage
change of less than ± 10% when one impulse
current (8× 20μs) applied.
Max. Clamping
Voltage
3.4
＊(2) V at ＊(2) A
Withstanding Surge
Current
3.5
＊(2) A
The max. current with a varistor voltage change
of less than ± 10% when two times impulse
current (8× 20μs) are applied at intervals of 5
minutes.
The max. energy absorbed with a varistor voltage
change of less than ± 10% when one impulse(10
× 1000μs) is applied.
3.6
3.7
Energy
＊(2) Joule
＊(2) A
The max. current with a varistor voltage change
of less than ± 10% when 10,000 times impulse
current (8× 20μs) are applied at intervals of 20
seconds at room temperature.
Surge Life
＊(2) See Page 5
CERAMATE [ CERAMATE TECHNICAL ]
