okpac
Gradateur angle de phase
Phase angle controller
PRELIMINAIRE / PRELIMINARY
❏
Relais statique à entrée analogique permettant un contrôle en puissance
de charge résistive par une variation en angle de phase
SSR based phase angle controller with analog control to adjust power on
resistive loads (linear power law response)
❏
Gamme en courant des SO4 : 35 à 125A
SO4. current range : 35 to 125A
❏
Protection contre les surtensions par varistor intégré
Overvoltage protection by varistor.
❏
Plage de fréquence réseau :40 à 70 Hz auto-adaptable
Main frequency range : 40 to 70Hz with self adaptation
❏
Alimentation 8-30V et led verte de visualisation
8-30V supply voltage and Green LED visualization on the input.
❏
Entrée analogique 0-5V.
0-5V analog input voltage.
❏
Construit en conformité aux normes EN60947-4-3 (IEC947-4-3)
et EN60950/VDE0805 (Isolement renforcé)
Designed in compliance with EN60947-4-3 (IEC947-4-3)
and EN60950/VDE0805 (Reinforced Insulation)
❏
Protection IP20 par volets sur les bornes.
IP20 protection by flaps on terminals.
S/MON/SO468120/B/25/05/2007
page 1 / 5F/GB
SO468120
Sortie/Output : 200-480VAC 50A
Alimentation/Supply : 8-30V
Entrée analogique/Analog Input : 0-5V
2 connecteurs d'entrée débrochable
à technologie ressort.
Gris: Alimentation
Orange: Entrée analogique 0-5V
Two removable input spring connectors
Grey: Supply
Orange : Analog input 0-5V
Dimensions :
200-480Vac
Entrée
analogique
Analog
input
0-5VDC
Alimentation
Supply
8-30VDC
- 1/L1 et 2/T1 peuvent être inversées.
1/L1 and 2/T1 can be swapped.
- Le relais doit être monté sur dissipateur thermique.
SSR must be mounted on heatsink
Entrée
ana.
Control
input
Alim.
Supply
Application typique /
Typical application:
10kW (AC-51) - 400 VAC 50hz
Proud to serve you
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
r
celduc
e
l
a
i
s