okpac
Gradateur angle de phase
Phase angle controller
❏
Relais statique à entrée analogique permettant un contrôle en
puissance de la charge par une variation en angle de phase
Analog switching Solid State Relay works for load power control in
accordance with the phase angle principle.
❏
Sortie thyristors technologie TMS
2
(*) permettant une longue durée
de vie :
Gamme de 90 à 600VAC 35 à 125A
Back to back thyristors on output with TMS
2
(*)
technology for a
long lifetime expectancy : Range 90 to 600VAC and 35 to 125A
S/MON/SO445420/A/05/12/2005
page 1 / 5F/GB
SO445420
Output : 90-280VAC 50A
Analog Input : 4-20mA
❏
4-20mA courant de commande. 4 mA correspondant à une puissance
de sortie nulle et 20mA à pleine puissance.
LED de visualisation sur l'entrée de couleur verte.
4-20mA control current. 4mA corresponds to no switching and 20mA
to full sine wave.
Microcontroller Inside
Green LED visualization on the input.
❏
Construit en conformité aux normes EN60947-4-3 (IEC947-4-3)
et EN60950/VDE0805 (Isolement renforcé)
Designed in conformity with EN60947-4-3 (IEC947-4-3)
and EN60950/VDE0805 (Reinforced Insulation)
IP20
❏
Protection IP20 par volets sur les bornes.
IP20 protection by flaps on terminals.
Dimensions :
4-20mA
- 1/L1 et 2/T1 peuvent être inversées.
1/L1 and 2/T1 can be swapped.
- Le relais doit être monté sur dissipateur thermique.
SSR must be mounted on heatsink
Application typique /
Typical application:
10kW resistance (AC-51) - 230 VAC 50hz
(*) : Thermo Mechanical Stress Solution
Proud to serve you
All technical caracteristics are subject to change without previous notice.
Caractéristiques sujettes à modifications sans préavis.
r
celduc
e
l
a
i
s