S/MOD/SKL15240/A/19/05/2000
page 3 / 3 F/GB
1: Itsm non répétitif ( sans
tension réappliquée) / No
repetitive Itsm
Surge current Itsm (A peak) = f(t) for models with Itsm =300A
300
200
100
0
(Apeak)=f(t) without vol-
tage reapplied
1
2 : Itsm répétif ( avec ten-
sion réappliquée et Tj ini-
tial =70°C) / Repetitive
Itsm (Apeak)=f(t) with
voltage reapplied for ini-
tial Tj =70°C
2
0,01
0,1
1
10
fig 3
t (s)
Exemples de montage / Mounting examples
Dissipateurs thermiques avec clips de montage ( Max Clip System (*))
celduc HEATSINKS references ( Aavid Thermalloy S507):
WF042000: L=100mm about 4K/W (1SSR) without ventilation (3,6K/W with 4SSRs )
WF032000: L=150mm about 3K/W (1SSR) without ventilation (2,6K/W with 6SSRs )
autres dissipateurs sur demande / a large range is also available on request
Clips reference : 1L941000
Complementary heatsink if necessary
Clip max 23 Aavid Thermalloy
graisse thermique /
Thermal grease
7,9mm ± 0,15
51
4mm
isolant
Montage sur divers dissipateurs et clips à vis/ Clips with screws on standard heatsinks
M3
clips : 1L942000
4 mm to
respect
26,5mm
insulation
graisse thermique /
Thermal grease
Printed circuit board
Dans tous les cas,mettre une cale isolante de 4 mm sous le dissipateur afin de respecter les distances minimales d'isolation entre
entrée et sortie. / In each case , 4mm must be respected between the printed circuit board and the heatsink , to keep a correct
insulation between input to output (4mm insulated washer )
Bien s'assurer lors du montage que le relais plaque au dissipateur. Utiliser de la graisse thermique.
/ Mind to the good contact between the SSR and the heatsink . Use thermal grease.
* The Max Clip System of Aavid Thermalloy , Patented Worldwide ( patent N°9805561)
celduc
www.celduc.com
r
e
l
a
i
s
Rue Ampère B.P. 4
42290 SORBIERS - FRANCE
E-Mail : celduc-relais@celduc.com
Fax +33 (0) 4 77 53 85 51
Service Commercial France Tél. : +33 (0) 4 77 53 90 20
Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19