S/MOD/SKL10540/C/15/09/2008
page 3 / 3 F/GB
Surge current ITSM(Apeak)=f(t)
ITSM(Apeak)
700
600
500
Itsm non répétitif sans tension réappliquée/
No repetitive itsm without voltage reapplied
Fig3:Courants de surcharge
admissibles /
400
300
Surge current Itsm.
200
100
Itsm répétitif avec tension réappliquée /
Repetitive itsm with voltage reapplied
0
0,01
0, 1
1
t (s)
Surcharge de longues durées
Temps
I (A)
60 s 100 s
Long time overload @ Tj init=45°C
20
15
Dissipateurs thermiques avec clips de montage ( Max Clip System (*))
celduc HEATSINKS references ( Aavid Thermalloy S507):
WF042000: L=100mm about 4K/W (1SSR) without ventilation (3,6K/W with 4SSRs )
WF032000: L=150mm about 3K/W (1SSR) without ventilation (2,6K/W with 6SSRs )
autres dissipateurs sur demande / a large range is also available on request
Clips reference : 1L941000
Complementary heatsink if necessary
Clip max 23 Aavid Thermalloy
graisse thermique /
Thermal grease
,9mm ± 0,15
51
4mm
isolant
Montage sur divers dissipateurs et clips à vis/ Clips with screws on standard heatsinks
M3
clips : 1L942000
4 mm to
respect
insulation
26,5mm
Exemples
graisse thermique /
de mon-
Thermal grease
tage /
Printed circuit board
Dans tous les cas,mettre une cale isolante de 4 mm sous le dissipateur afin de respecter les distances minimales dM'isoloatiuonnen-tre
entrée et sortie. / In each case , 4mm must be respected between the printed circuit board and the heatsink , to keep a correct
ting examples
insulation between input to output (4mm insulated washer )
Bien s'assurer lors du montage que le relais plaque au dissipateur. Utiliser de la graisse thermique.
/ Mind to the good contact between the SSR and the heatsink . Use thermal grease.
* The Max Clip System of Aavid Thermalloy , Patented Worldwide ( patent N°9805561)
celduc
www.celduc.com
r
e
l
a
i
s
Rue Ampère B.P. 4
42290 SORBIERS - FRANCE
E-Mail : celduc-relais@celduc.com
Fax +33 (0) 4 77 53 85 51
Service Commercial France Tél. : +33 (0) 4 77 53 90 20
Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19