P/P3S-P4S/B/08/01/2016
page 6 / 6 GB
Dimensions (mm):
Sensor cable output
Sensor connector output
Actuator
PRECAUTIONS:
Cable protection:
Avoid the too much external magnetic fields.
Mounting upon ferromagnetic support:
With these sensors a magnetic hold is not necessary, but putting them in a ferromagnetic environment may de-
crease the detection distances. We advise minimum distances.
Maintenance :
The reliability of these entirely electronic sensors is important. The selfcontrol is automatically secured by the
product.
Check periodically the good working of the LED (green when all is OK).
Check the fasteners and remove the metal shavings.
Watch its all-round good working and replace it in case of degradation.
Switch off the power supply before working on the sensor.
Only qualified people must perform the installation, and the maintenance.
www.celduc.com
r
e
l
a
i
s
5, Rue Ampère BP30004 42290 SORBIERS - FRANCE
E-mail : celduc-relais@celduc.com
Fax +33 (0) 4 77 53 85 51
Service Commercial France Tél. : +33 (0) 4 77 53 90 20
Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tél. +33 (0) 4 77 53 90 19
CELDUC [ celduc-relais ]
