NDL5521P SERIES
HANDLING PRECAUTION FOR PD/APD MODULE
The NEC PD/APD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module
body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling
precautions:
1. Do not make the fiber bend radius less than 30 mm (*3).
2. Do not bend the fiber within the 18 mm section from the module body (*4).
3. Do not stress the ferrule with a lateral force exceeding 500 g (*5).
fiber
30 mm MIN (*3)
(*1)
18 mm MIN (*4)
ferrule (*5)
(*2)
module body
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES ¥ Headquarters ¥ 4590 Patrick Henry Drive ¥ Santa Clara, CA 95054-1817 ¥ (408) 988-3500 ¥ Telex 34-6393 ¥ FAX (408) 988-027
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) ¥ Internet: http://WWW.CEL.COM
11/14/2000
DATA SUBJECT TO CHANGE WITHOUT NOTICE
CEL [ CALIFORNIA EASTERN LABS ]
