BOE100
TO18 Plastic
IR Emitter
ABSOLUTE MAXIMUM RATINGS (25oC unless otherwise noted)
-40 C TO +100oC
-40 C TO 100oC
STORAGE TEMP
OPERATING TEMP
100mA
CONTINUOUS FORWARD CURRENT
5.0V
REVERSE VOLTAGE
POWER DISSIPATION
200mW (1)
240oC for 5secs(2,3,5)
260oC for 10secs
LEAD SOLDERING TEMPERATURE (Iron)
LEAD SOLDERING TEMPERATURE9(Flow)
OPTO ELECTRONIC DATA(Ta=25oC unless stated)
PARAMETER
SYMBOL
MIN
TYP
MAX
UNITS
TEST CONDISTIONS
Vf
1.70
10
V
If = 20mA
Vr=5.0V
If=20mA
Forward Voltage
Ir
μA
nm
Reverse leakage Current
λp
880
±35
Peak Emission Wavelength
deg
Emission Angle at ½ Radiated Power
Density.
Θ
EΘ
16
26
mW/sqcm
If=100mA(6,7)
Radiant incidence
NOTES
1. Derate power dissipation linearly at 2.7mW/oC above 25oC.
2. RMA flux is recommended.
3. Methonal or Isopropylalcohols are recommended as cleaning agents.
4. Solder iron tip 1.6mm minimum from housing.
5. Leads not to be under stress or tension.
6. Measurment taken at the end of a 100μS pulse.
7. EΘ is a measure of the average apertured radiant energy incident
upon a sensing area 6.35mm diameter perpendicular to and centred on
the mechanical axis of the lens and 10.7mm from the measurement sur-
face.Eθis not necessarily uniform within the measurement area.
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
BOT [ BEDFORD OPTO TECHNOLOGY LTD. ]
