ARI-6400F
400W Redundant Power Supply
Industrial Power Supply
DC OUTPUT WIRES
3.5
16.8
16.0
9.0
22.0
Redundant
6.9
0.45
8.5
2.1
13.4
Features
*Input Voltage:
90~132VAC or 180~260VAC selectable
*Input Frequency:
47~63Hz
*Safety:
UL 1950 / CSA 1402C & CSA 950 / TUV EN60950
*Input Current:
10A at 115VAC or 6A at 230VAC max.
*Inrush Current:
< 50A at 100VAC, < 100A at 220VAC, < 60A
*Earth Continuity Resistance:
FG to HG > 0.01 ohm11
*EMI:
FCC part 15 class B rules VDE
at 230VAC input cold start, 25
o
C excluding EMI capacitors
*Load Range:
At 100% max. load condition in all outputs, +5V
output is between 4.98V and 5.02V, +3.3V is between +3.25V
and +3.35V. All other outputs are within their specified voltage
accuracy ranges
Output Min. Rated Max.
Voltage
Voltage Load Load
Load
Accuracy
*Ripple and Noise:
Peak to peak ripple and noise for +5V and
+5V
7A
25A
36A
4.75~5.25V
+3.3V outputs are < 60mV, and < 120mV for -5V, +12V, and
+12V 2.5A
16A
17A
11.4~12.9V
+5Vsb outputs
-12V
0A
0.8A
0.8A -11.30~-12.6V
*Line Regulation:
< +/-1% for +5V, +12V, -12V, and +5Vsb
-5V
0A
0.8A
0.8A -4.65~-5.25V
outputs. +3.3V is +/-2%
+3.3V
3A
20A
25A
3.15~3.45V
*Hold Up Time:
> 16ms at 115VAC or 230VAC input and max.
+5Vsb 0.1A 0.75A
2A
4.8~5.2V
load measured from the last AC line charging pulse to the point
when +5V drops down to +4.75V
*Output Power:
Total DC continuous power is within 400W at
< 30
o
C ambient temperature
*Power Good Signal:
Signal goes high from 100~500ms after
all output DC voltages are within regulation limits
*Power Redundancy:
This power supply has power redundant
capability
*Efficiency:
65% typical, measured at nominal line and rated
load
*Protection:
Built-in over voltage protection circuit. Trip point
between 5.7~7.0V AC line off and on cycle for over voltage
protection recovery latch off mode against short circuit or over
load conditions
*Dimensions:
19.2 x 16.8 x 22.0 cm
Safety Standards
19.2
www.boser.com.tw
BOSER [ BOSER TECHNOLOGY CO., LTD ]
