SPECIFICATIONS (CONT)
ELECTRICAL
At TA = TMIN to TMAX , VDD = +5V, VEE = –15V to +5V, sampling frequency of 117kHz, fIN = 10kHz; unless otherwise specified.
ADS774JE, JP, JU
TYP
ADS774KE, KP, KU
PARAMETER
OUTPUTS
MIN
MAX
MIN
TYP
MAX
UNITS
DIGITAL (DB11 - DB0, STATUS)
Output Codes: Unipolar
Bipolar
Unipolar Straight Binary (USB)
Bipolar Offset Binary (BOB)
Logic Levels: Logic 0 (ISINK = 1.6mA)
Logic 1 (ISOURCE = 500µA)
Leakage, Data Bits Only, High-Z State
Capacitance
+0.4
✻
✻
V
V
µA
pF
+2.4
–5
✻
✻
0.1
5
+5
✻
✻
INTERNAL REFERENCE VOLTAGE
Voltage
Source Current Available for External Loads
+2.4
0.5
+2.5
+2.6
✻
✻
✻
✻
V
mA
POWER SUPPLY REQUIREMENTS
(7)
Voltage: VEE
–16.5
+4.5
VDD
+5.5
✻
✻
✻
✻
V
V
mA
mA
VDD
Current: IEE
IDD
(7)
(VEE = –15V)
–1
+15
✻
✻
+24
120
✻
✻
Power Dissipation (TMIN to TMAX
(VEE = 0V to +5V)
)
75
✻
mW
TEMPERATURE RANGE
Specification
Operating:
0
–40
–65
+70
+85
+150
✻
✻
✻
✻
✻
✻
°C
°C
°C
Storage Temperature Range
✻ Same specification as ADS774JE, JP, JU.
NOTES: (1) With fixed 50Ω resistor from REF OUT to REF IN. This parameter is also adjustable to zero at +25°C. (2) FS in this specification table means Full Scale
Range. That is, for a ±10V input range, FS means 20V; for a 0 to +10V range, FS means 10V. (3) Maximum error at TMIN and TMAX. (4) Based on using VEE
=
+5V, which is the Control Mode. See the section "S/H Control Mode and ADC774 Emulation Mode." (5) Using internal reference. (6) This is worst case change
in accuracy from accuracy with a +5V supply. (7) VEE is optional, and is only used to set the mode for the internal sample/hold. When VEE = –15V, IEE = –1mA
typ; when VEE = 0V, IEE = ±5µA typ; when VEE = +5V, IEE = +167µA typ.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
3
ADS774