ABSOLUTE MAXIMUM RATINGS
BURN-IN SCREENING
Burn-in screening is available for both plastic and ceramic
package ADC574s. Burn-in duration is 160 hours at the
temperature (or equivalent combination of time and tem-
perature) indicated below:
VCC to Digital Common ......................................................... 0V to +16.5V
V
V
EE to Digital Common.......................................................... 0V to –16.5V
LOGIC Digital Common .............................................................. 0V to +7V
Analog Common to Digital Common .................................................... ±1V
Control Inputs (CE, CS, AO, 12/8, R/C)
to Digital Common .............................................. –0.5V to VLOGIC +0.5V
Plastic “–BI” models: +85°C
Ceramic “–BI” models: +125°C
Analog Inputs (Ref In, Bipolar Offset, 10VIN
)
to Analog Common ...................................................................... ±16.5V
20VIN to Analog Common .................................................................. ±24V
Ref Out.......................................................... Indefinite Short to Common,
Momentary Short to VCC
Max Junction Temperature ............................................................ +165°C
Power Dissipation ........................................................................ 1000mW
Lead Temperature (soldering,10s) ................................................. +300°C
Thermal Resistance, θJA : Ceramic ................................................ 50°C/W
Plastic ................................................. 100°C/W
All units are 100% electrically tested after burn-in is com-
pleted. To order burn-in, add “–BI” to the base model
number (e.g., ADC574AKP-BI).
CAUTION: These devices are sensitive to electrostatic discharge.
Appropriate I.C. handling procedures should be followed.
ORDERING INFORMATION
LINEARITY
ERROR MAX
(TMINTO TMAX)
TEMPERATURE
RANGE
MODEL
PACKAGE
ADC574AJP
ADC574AKP
ADC574AJH
ADC574AKH
ADC574ASH
ADC574ATH
Plastic DIP
Plastic DIP
Ceramic DIP
Ceramic DIP
Ceramic DIP
Ceramic DIP
0°C to +75°C
0°C to +75°C
0°C to +75°C
0°C to +75°C
–55°C to +125°C
–55°C to +125°C
±1LSB
±1/2LSB
±1LSB
±1/2LSB
±1LSB
±3/4LSB
BURN-IN SCREENING OPTION
See text for details.
TEMPERATURE
RANGE
BURN-IN TEMP
(160 Hours)
MODEL
PACKAGE
ADC574AJP-BI
ADC574AKP-BI
ADC574AJH-BI
ADC574AKH-BI
ADC574ASH-BI
ADC574ATH-BI
Plastic DIP
Plastic DIP
Ceramic DIP
Ceramic DIP
Ceramic DIP
Ceramic DIP
0°C to +75°C
0°C to +75°C
0°C to +75°C
0°C to +75°C
–55°C to +125°C
–55°C to +125°C
+85°C
+85°C
+125°C
+125°C
+125°C
+125°C
PACKAGE INFORMATION
PACKAGE DRAWING
MODEL
PACKAGE
NUMBER(1)
ADC574AJP
ADC574AKP
ADC574AJH
ADC574AKH
ADC574ASH
ADC574ATH
Plastic DIP
Plastic DIP
Ceramic DIP
Ceramic DIP
Ceramic DIP
Ceramic DIP
215
215
149
149
149
149
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix D of Burr-Brown IC Data Book.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
4
ADC574A
BB [ BURR-BROWN CORPORATION ]
