63W Medical Grade Desktop Switching Power Adapters
AMP6301 series
INPUT SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Input Voltage Range
Frequency Range
90-264 VAC
47-63 Hz
Size
5.75”L x 2.99”W x 1.69”H
Desktop Style
Construction
Weight
Leakage Current
0.1mA typ. @ 240VAC
1.62A
19.75oz (560g)
Input Current Lowline
Input Current Highline
Inrush Current Lowline
Inrush Current Highline
0.72A
ENVIRONMENTAL SPECIFICATIONS
15A max.
30A max.
Oper. Temperature
0 to +70°C
Power Consumption @ No Load (Approved to CEC level IV)
See Derate Curve
-40 to +85°C *
5 to + 95%, non-cond *
100,000 Hrs.
12-36 Vout:
0.5W, max.
Storage Temperature
Relative Humidity
MTBF: MIL-HDBK-217F
EMI
OUTPUT SPECIFICATIONS
220VAC in: CISPR-11B
110VAC in: FCC-18B
V (9-36 Vout only)
Voltage and Current
Load Regulation
See Selection Charts
See Selection Charts
± 0.5%, typ (1% Max.)
0.5% Pk-Pk, typ (1% Max.)
16mS min. at 110VAC Input
1S typ. (2S max.)
112-132%
Efficiency Level
Line Regulation
Ripple/Noise
OUTPUT DERATING CURVE
Hold Up Time
Start Up Time
Over Voltage Protection
Over Current Protection
Transient Response (FL-1/2L)
Temperature Coefficient
110-150%
4mS
±0.04%/°C, typ.
GENERAL SPECIFICATIONS
Isolation
I/P-O/P: 5600VDC
I/P-GND: 2800VDC
50MΩ
Isolation Resistance
Efficiency
85% typ.
Safety
UL60601-1, EN60601-1
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
WWW.ASTRODYNETDI.COM