AHP1001 series
ENVIRONMENTAL SPECIFICATIONS
Medical Grade Class II 10 Watt Adapter
INPUT SPECIFICATIONS
Input Voltage Range (See I/P
80-275 VAC (100-240VAC Nom.)
Operating Temperature
-10 to +70°C
See Input Derate Curve (Fig 1)
Sine Wave, 47-63 Hz
See Temp Derate Curve (Fig 2)
-40 to +85°C, 10~95% RH *
0% to +95%,
Frequency Range
Storage Temperature
Inrush I, Cold Start, FL 25°C
40A @ 100VAC *
Operating & Storage Humidity
100A @ 240VAC FL *
0.3A max./0.2A max. FL
Double Insulated, Class II
Non-Condensing *
Free Air Convection
2kV, min.
Input Current (100Vin/240Vin)
Protection Class
Cooling
Surge Voltage
EMC Emission
EN55011 (CISPR11)
EN61000-3-2, -3 Class B
IEC61000-4-2
OUTPUT SPECIFICATIONS
ESD
Contact 6KV, Air 8KV
Vibration
5G Min.
Voltage and Current
Line Regulation HL-LL
Total Regulation
See Selection Chart Page 1
±1%, max. FL
Operating Altitude (Elevation)
3000m max.
10 ~ 500Hz, 10min./1cycle,
60min. each along X, Y, Z axes
100,000 Hrs, min.
MIL-HDBK-217F, 25°C
UL94V-1
See Selection Chart Page 1
See Selection Chart Page 1
110-150% max. Auto Recovery *
Auto Recovery *
Ripple/Noise (See Note)
Over Load Protection
Short Circuit Protection
Transient Response
Start Up Time
MTBF
Flammability Rating
GENERAL SPECIFICATIONS
Isolation
4mS at FL, 110VAC
2S, min. at FL, 100VAC
12mS, min. at FL, 100VAC
±0.04%/°C
Hold Up Time
Temperature Coefficient
I/P-O/P: 4000VAC
Limit Current <10mA
O/P-Ground: 707VDC 60S
≥20MΩ, 500V, 1S, I/P to O/P
See Selection Chart
ANSI/AAMI ES60601-1:2005
3rd ed.
PHYSICAL SPECIFICATIONS
Size L x W x H (Inches/mm)
Weight
Insulation Resistance
2.2” x 1.73” x 1.08” /
56 x 44 x 27.5mm
90g typ.
Efficiency at FL & Nominal Line
Safety
UL/cUL:
NOTE
Ripple & Noise is measured by using a 20MHz bandwidth limited
oscilloscope and terminating each output with a 0.47uF capacitor at FL
and Nominal line.
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
WWW.ASTRODYNETDI.COM
ASTRODYNE [ ASTRODYNE CORPORATION ]
