ACA2407E
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Mimimum and Maximum Ratings
PARAMETER
MIN
MAX
+28
UNIT
VDC
dBmV
°C
Supply (pins 12, 13)
RF Power at Inputs (pins 4, 5)
Storage Temperature
Soldering Temperature
Soldering Time
0
-
-65
-
+75
+150
+260
5.0
°C
-
Sec
Stresses in excess of the absolute ratings may cause permanent damage.
Functional operation is not implied under these conditions. Exposure
to absolute ratings for extended periods of time may adversely affect
reliability.
Notes:
1. Pins 2, 4, 5 and 7 should be AC-coupled. No external DC bias should be
applied.
2. Pin 6 should be AC-grounded and/or pulled to ground through a resistor for
current control.
3.ꢀ Pinsꢀ11ꢀandꢀ14ꢀareꢀbiasꢀfeedsꢀforꢀinputꢀamplifiersꢀ1Aꢀandꢀ1B.ꢀNoꢀexternalꢀ
DC bias should be applied.
4. Pins 10 and 15 receive DC bias directly from pins 11 and 14.
Table 3: Operating Ranges
PARAMETER
MIN
-
TYP
+24
+3
-
MAX
-
UNIT
VDC
VDC
MHz
°C
Supply: VDD (pins 12, 13)
Voltage at ISET (pin 6)
RF Frequency
-
-
40
-40
870
+110
Case Temperature
-
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
Data Sheet - Rev 2.5
04/2012
3
ANADIGICS [ ANADIGICS, INC ]
