欢迎访问ic37.com |
会员登录 免费注册
发布采购

S2070B 参数 Datasheet PDF下载

S2070B图片预览
型号: S2070B
PDF下载: 下载PDF文件 查看货源
内容描述: [Ethernet Transceiver, Bipolar, PQFP64, 14 X 14 MM, PLASTIC, QFP-64]
分类和应用: 以太网:16GBASE-T电信电信集成电路
文件页数/大小: 7 页 / 84 K
品牌: AMCC [ APPLIED MICRO CIRCUITS CORPORATION ]
 浏览型号S2070B的Datasheet PDF文件第1页浏览型号S2070B的Datasheet PDF文件第2页浏览型号S2070B的Datasheet PDF文件第3页浏览型号S2070B的Datasheet PDF文件第4页浏览型号S2070B的Datasheet PDF文件第5页浏览型号S2070B的Datasheet PDF文件第6页  
APPLICATION NOTES AND REFERENCE DIAGRAMS  
S2070 Compatibility with Existing Products  
S2070  
The S2070 is the CMOS equivalent of the S2052. The bulleted items below outline the functional differences  
between the two parts.  
• S2070 typical power dissipation is 660 mW. S2052 dissipates 800 mW.  
• S2070 serial input bias voltage is VCC–1.3V (standard LVPECL). This complies with both HP and Vitesse.  
S2052 serial input bias voltage is VCC–0.65.  
With the recommended AC coupled input connection, the bias voltage is irrelevant (see previous section on  
serial input/output connections); however, designers who wish to set the bias voltage externally should take  
note of the difference in bias voltage.  
• S2060 serial input should not have a pull-up offset resistor.  
S2052 pull-up resistor value is 10k(for applications where input data goes away).  
• When EWRAP is active, TXP/N outputs are static (High). This complies with the S2052. HP holds both pins  
High. Vitesse holds the P output High and the N output Low.  
• S2070 pin 14 is rate selection pin, held low for normal (full rate) operation. S2052 pin 14 is ground.  
• S2070 pin 27 (-LCKREF) can be either floated or held high to lock to input data (normal operation).  
S2052 pin 27 (-LCKREF) must be held high to lock to input data.  
Applied Micro Circuits Corporation • 6290 Sequence Dr., San Diego, CA 92121  
Phone: (858) 450-9333 • (800) 755-2622 • Fax: (858) 450-9885  
http://www.amcc.com  
AMCC reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and  
advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied  
on is current.  
AMCC does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey  
any license under its patent rights nor the rights of others.  
AMCC reserves the right to ship devices of higher grade in place of those of lower grade.  
AMCC SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR  
USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS.  
AMCC is a registered trademark of Applied Micro Circuits Corporation.  
Copyright ® 1999 Applied Micro Circuits Corporation  
July 8, 1999  
7