Series AM10TW-Z
10 Watt | DC-DC Converter
Dimensions
22.90
(0.90)
31.80
(1.25)
0.50
(0.02)
1
2
3
11
9
Bottom View
23 22
16 14
2.54
5.08
(0.10)
(0.20)
Printed Face
All dimensions are typical: millimeters (inches)
Pin Diameter: 0.50 ± 0.05 (0.02 ± 0.002)
Pin Pitch Tolerance: ± 0.35 (±0.014)
Case Tolerence: ± 0.5 (±0.02)
Derating
Free Air Convection
º
C
60
100
80
60
40
20
0
Safe Operating Area
0
20 40 60 8085 100
-
-
40 20
Ambient Temperature
º C
Recommended Circuit
Surge/EFT
Conducted Emissions
+Vout
+Vin
-Vin
+Vout
+Vin
L
DC/DC
Converter
DC/DC
Converter
Load
C1
C2
C1
Load
-Vin
-Vout
-Vout
C1
2.2uF, 100V
L
12uH
C2
2.2uF, 100V
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R12.C
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
AIMTEC [ AIMTEC ]
