Series AM10T-Z
10 Watt | DC-DC Converter
Pin Out Specifications
Dimensions
Pin
2
3
Single
-V Input
-V Input
No pin
Dual
-V Input
-V Input
Common
-V Output
+ V Output
Common
+V Input
+V Input
22.90
(0.90)
31.80
(1.25)
0.50
(0.02)
9
2
3
11
9
11
14
16
22
23
N.C.
+V Output
-V Output
+V Input
+V Input
Bottom View
23 22
16 14
2.54
(0.10)
5.08
(0.20)
Built-in Stand-offs to
ease PCB cleaning
Printed Face
Derating
All dimensions are typical: millimeters (inches)
Pin Diameter: 0.50 ± 0.05 (0.02 ± 0.002)
Pin Pitch Tolerance: ± 0.35 (±0.014)
Case Tolerence: ± 0.5 (±0.02)
Free Air Convection
º
C
60
100
80
Safe Operating Area
60
40
20
0
0
20 40
60 8085 100
-
-
40 20
Ambient Temperature
º C
Test Circuits
Conducted Emissions:
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
www.aimtec.com
F 051e R12.C
Tel: +1 514 620 2722
3 of 4
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only