Series AM10CW-NZ
10 Watt | DC-DC Converter
Typical application circuits
Single
Dual
Vin+
Vin+
Vin-
Vo+
Vo-
Vo+
+
+
+
+
10uF
Com
Cin
10uF
Cin
+
Vin-
10uF
Vo-
24V input
48V input
Cin
100μF
10-47μF
Recommended EMC Circuits
For EMS test
For EMI test
LDM1
4.7μH
CY1
1nF/2KV
FUSE
+ Vout
DC
+Vout
-Vout
+ Vin
+ Vin
+
+
DC
C2
C3
C1
MOV
10μF
- Vin
- Vin
- Vout
CY2
1nF/2KV
A
B
24V input
S20K30
330µF/50V
1µF/50V
48V input
S14K60
330µF/100V
1µF/100V
MOV
C1/C3
C2
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R17
REV: 11/19/A
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only
AIMTEC [ AIMTEC ]
