Series AM10C-FZ
10 Watt | DC-DC Converter
Dimensions
Bottom View
Top View
25.40
(1.00)
2.54
(0.10)
10.16
(0.40)
10.16
(0.40)
5
6
4
+V Output
-V Output
+V
-V
Input
Input
CTRL
1
2
3
7.62
(0.30)
10.16
(0.40)
5.08
(0.20)
Side View
Printed Face
2.54
(0.10)
1.00
(0.39)
Notes:
All dimensions are typical in millimeters (inches).
Pin Pitch Tolerance ±0.35 (±0.014)
Case Tolerance ±0.50 (±0.02)
Derating
Free Air Convection
º
60
C
100
80
Safe Operating Area
60
40
30
20
0
85
80
100
- 40 - 20
0
20
40
60
º C
Ambient Temperature
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R13
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only