Series AM100HB-UZ
100 Watt | Half Brick DC-DC Converter
Derating:
A
Free Air
E
100
D
B
C
100 LFM
80
C
60
40
200 LFM
B
A
D
300 LFM
Safe
Operating
Area
20
0
E
400 LFM
85
0
20
40
80
60
100
º C
Ambient Temperature
Typical Application:
Aimtec’s half brick models can operate independently. However, to enhance their performance and to ensure precision of the
output signal parameters the following connections are recommended:
Output Ripple and Noise Measurement test setup:
Please refer to our Application note: Ripple and Noise Measurement of Brick & POL DC-DC Converters.
ON/OFF Control:
The converter output can be disabled by moving SW to position “a” –
connected to –Vin with voltage level between -0.7 and 0.4V.
When SW is open in position “b”, the converter is ON and operates
normally.
www.aimtec.com
F 054e R3.D
Tel: +1 514 620 2722
3 of 4
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
AIMTEC [ AIMTEC ]
