Series AM1/2S-Z
0.5 Watt | DC-DC Converter
EMI Filtering
To meet conducted emissions, the following circuit is recommended with the external components as noted in the table below.
L1
Vin+
+
Vo+
Aimtec
DC-DC
C1
C2
Converter
Vin-
-
Vo-
C3
Model
3.3 &5 Vin
12 & 15 Vin
24 Vin
C1
L1
C2
C3
2.2 µF / 100V
2.2 µF / 100V
2.2 µF / 100V
10 µF / 100V*
18 µH
18 µH
18 µH
18 µH
2.2 µF / 100V
2.2 µF / 100V
470pF / 2KV
470pF / 2KV
48 Vin
* - Electrolytic Capacitor Type
Additionally, in order to meet IEC 61000-4-4 and 61000-4-5 and external capacitor is recommended (ex. Nippon KY series of size 470µF /
100V).
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3.Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R6.L
Rev: 05/20/A
Tel: +1 514 620 2722
5 of 5
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only