On-screen Dynamic Range
On-screen dynamic range [dBc]
Offset frequency [Hz]
Figure 1-5. Typical on-screen dynamic range (center: 50 MHz)
Spurious responses
Second harmonic distortion
at single tone input with full scale input level –10 dB, input signal frequency ≥ 100 kHz
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < –70 dBc
Third order inter-modulation distortion
at two tones input with full scale input level –16 dB, separation ≥ 100 kHz
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < –70 dBc
Spurious
at single tone input with full scale input level –10 dB, input signal frequency ≤ 500 MHz
(RBW ≤ 100 kHz, 1 kHz ≤ frequency offset ≤ 300 MHz)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < –70 dBc
(≤ 60 dBc (SPC) if there are input signals in the following frequency range:
(14.7 MHz to 15.9 MHz, 29.5 MHz to 31.7 MHz, 414.7 MHz to 415.9 MHz)
Residual response
at reference value setting ≤ –40 dBm, input attenuator: auto or 0 dB . . . . .< –108 dBm
8
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
