Trigger Function
Trigger type
Trigger source
Continuous, Single, Number of groups
Internal (Free run), External (BNC connector input), GPIB or LAN,
Manual (Front key)
Point trigger, Sweep trigger
Trigger event type
Measurement Bandwidth/Averaging
Measurement bandwidth
Range
Averaging
Type
Averaging factor
Sweep-to-sweep averaging, Point averaging
1 to 256 (integer)
1 (Fast) to 5 (Precise), 5 steps
Adapter Setup
Adapter Selection
NONE
No adapter (the 16047E, etc. direct connection type test fixture is
connected)
Four-terminal pair 1 m (16048G)
Four-terminal pair 2 m (16048H)
Terminal Adapter (42942A)
Impedance Probe (42941A)
4TP 1M
4TP 2M
7-mm 42942A
PROBE 42941A
Calibration
Calibration
User calibration
Calibration performed with user-defined calibration kit (OPEN,
SHORT, LOAD)
Compensation performed when the measurement terminal is
expanded from the 7-mm connector of the 42942A Terminal
Adapter or the 3.5-mm connector of the 42941A Impedance
Probe. Enter electrical length or delay time for the extension.
Compensation performed at the device contacts of the test fix-
ture using OPEN, SHORT, LOAD.
Fixed points, or User points determined by sweep setups
Port extension
Fixture compensation
Calibration points
7