Specifications
Specifications
1
Frequency range
2
Frequency response
Octave band flatness
(over any octave 0 01
to 8 GHz)
Broadband flatness
Agilent 423B
0.01 to 12.4 GHz
Agilent 8473B
0.01 to 18 GH
z
Agilent 8473C
Agilent 8470B
0.01 to 18 GHz
Agilent 8472B
0.00 to 18 GHz
0.01 to 26.5 GHz
±0.2 dB
0.01 to 12.4 GHz: ±0.3 dB
0.01 to 20 GHz: ±6 dB
20 to 26.5 GHz: ±1.5 dB from
a 3.3 dB linear slope
0.01 to 4 GHz: 1.2
4 to 18 GHz: 1.5
18 to 26.5 GHz: 2.2
200 mW
1 watt (typical)
0.01 to 18 GHz: > 0.5 mV/μW
18 to 26.5 GHz: > 0.1 8 mV/μW
< 50 μV
±0.2 dB
±0.2 dB
±0.2 dB
±0.2 dB
0.01 dB to 12.4 GHz: ±0.3 dB
0.01 to 12.4 GHz: ±0.3 dB
0.01 to 18 GHZ: ±0.6 dB
0.01 to 12.4 GHz: ±0.3 dB
0.01 to 15 GHz: ±0.5 dB
0.01 to 18 GHz: ±0.6 dB
0.01 to 4 GHz: 1.15
4 to 15 GHz: 1.30
15 to 18 GHz: 1.70
200 mW
1 watt (typical)
> 0.5 mV/μW
0.01 to 12.4 GHz: ±0.3 dB
0.01 to 15 GHz: ±0.5 dB
SWR
3
, maximum (50Ω
characteristic impedance)
Maximum operating input
(Peak or average)
Short- term maximum Input
(less than 1 min.)
Sensitivity
4
Noise (μV peak-to-peak
with CW power applied to
produce 100 mV output)
Environmental qualifications
Operating temperature
Vibration
Shock
Output polarity
Input connector
Output connector
Video impedance
RF bypass capacitor
Dimensions in mm (inches)
Length
Diameter
Weight in grams (oz)
Net
Shipping
Options
xxxx-001
Matched response
Provides a pair of detectors
with matched frequency
response
xxxx-002
Optimum square-law load
xxxx-003
Positive polarity out
0.01 to 4 GHz: 1.15
4 to 12.4 G Hz: 1.30
200 mW
1 watt (typical)
> 0.5 mV/μW
0.01 to 4 GHz: 1.2
4 to 18 GHz: 1.5
200 mW
1 watt (typical)
> 0.5 mV/μW
0.01 to 4.5 GHz: 1.20
4.5 to 7 GHz: 1.35
200 mW
1 watt (typical)
> 0.5 mV/μW
< 50 μV
< 50 μV
< 50 μV
< 50 μV
0 to 55 °C
20 G’s, 80 - 2000 Hz
100 G’s, 11 ms
Negative
Type N Male
BNC Female
1 kΩ to 2 kΩ
1.3 kΩ (typical)
20 pF to 60 pF
30 pF (typical)
63 (2.47)
20 (038)
114 (4)
454 (16)
-20 °C to +85 °C
20 G’s, 80 - 2000 Hz
100 G’s, 11 ms
Negative
3.5 mm Male
(SMA Compatible)
BNC Female
1 kΩ to 2 kΩ
1.3 kΩ (typical)
20 pF to 60 pF
30 pF (typical)
48 (1.89)
10 (0.39)
14 (0.5)
454 (16)
-20 °C to +85 °C
20 G’s, 80 - 2000 Hz
100 G’s, 11 ms
Negative
3.5 mm Male
(SMA Compatible)
BNC Female
1 kΩ to 2 kΩ
1.3 kΩ (typical)
20 pF to 60 pF
30 pF (typical)
43 (1.89)
10 (0.39)
14 (0.5)
454 (16)
-20 °C to +85 °C
20 G’s, 80 - 2000 Hz
100 G’s, 11 ms
Negative
APC-7
BNC Female
1 kΩ to 2 kΩ
1.3 kΩ (typical)
20 pF to 60 pF
30 pF (typical)
64 (2.50)
19 (0.75)
114 (4)
454 (16)
-20 °C to +85 °C
20 G’s, 80 - 2000 Hz
100 G’s, 11 ms
Negative
SMA Male
BNC Female
1 kΩ to 2 kΩ
1.3 kΩ (typical)
20 pF to 60 pF
30 pF (typical)
64 (2.50)
14 (0.56)
57 (2)
454 (16)
Tracking:
0.01 to 12.4 GHz: ±0.2 dB
Tracking:
0.01 to 12.4 GHz: ±0.2 dB
12.4 to 18 GHz: ±0.3 dB
Optimum square -law load
Positive polarity Output
Tracking:
0.01 to 12.4 GHz: ±0.2 dB
12.4 to 18 GHz: ±0.3 dB
18 to 26.5 GHz: ±0.5 dB
Optimum square -law load
Positive polarity Output
Tracking:
0.01 to 12.4 GHz: ±0.2 dB
12.4to 18 GHz: ±0.3 dB
Optimum square -law load
Positive polarity Output
Tracking:
0.01 to 12.4 GHz: ±0.2 dB
12.4to 18 GHz: ±0.3 dB
Optimum square -law load
Positive polarity Output
Optimum square -law load
Positive polarity Output
1. Specifications given for +25 °C unless otherwise noted. Specifications describe the instrument’s warranted performance. Supplemental characteristics (in italics) are
intended to provide information useful in applying the instrument by giving typical, but not warranted, performance parameters.
2. RF may leak through video connector especially below 1 GHz; if objectionable, this may be eliminated with low-pass filter.
3. SWR measured at 2 dBm.
4. Sensitivity decreases with increasing temperature typically 0.5 dB from 20 °C to +25 °C, 0.5 dB from +25 °C to +40v C. 1 dB from +40 °C to +55 °C, 1.25 dB from
+55 °C to +75 °C, 1 dB from +75 °C to +85 °C.
3
AGILENT [ AGILENT TECHNOLOGIES, LTD. ]
