A371-Type Analog Uncooled Isolated
DFB FastLight Laser Module
Data Sheet
January 1999
Description
4
3
2
1
The A371-Type Uncooled Isolated Laser Module con-
sists of a laser diode coupled to a single-mode fiber
pigtail. The device is available in a standard, 8-pin con-
figuration (see Figure 1 and/or Table 1) and is ideal for
CATV applications.
5
6
7
8
1-900 (C)
The module includes a narrow linewidth (<1 nm), DFB-
MQW, single-mode laser and an InGaAs PIN photo-
diode back-facet monitor in a hermetically sealed pack-
age.
Figure 1. A371-Type Analog Uncooled Isolated DFB
Laser Module Schematic,Top View
The device characteristics listed in this document are
met at 2.0 mW output power. Higher- or lower-power
operation is possible. Under conditions of a fixed pho-
todiode current, the change in optical output is typically
±0.5 dB over an operating temperature range of –40 °C
to +85 °C.
Table 1. Pin Descriptions
Pin Number
Connection
1
2
3
4
5
6
7
8
NC
Case ground
NC
This device incorporates the new Laser 2000 manufac-
turing process from the Optoelectronics unit of Lucent
Technologies Microelectronics Group. Laser 2000 is a
low-cost platform that targets high-volume manufactur-
ing and tight product distributions on all optical subas-
semblies. This platform incorporates an advanced
optical design that is produced on Opto’s highly auto-
mated production lines. The Laser 2000 platform is
qualified for central office and uncontrolled environ-
ments, and can be used for applications requiring high
performance and low cost.
Photodiode cathode
Photodiode anode
Laser diode cathode
Laser diode anode
NC
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
Parameter
Symbol
Min
Max
Unit
Maximum Peak Laser Drive Current or
Maximum Fiber Power*
IOP
PMAX
—
—
150
10
mA
mW
Peak Reverse Laser Voltage:
Laser
Monitor
VRL
VRD
—
—
2
20
V
V
Monitor Forward Current
IFD
TC
—
–40
–40
—
2
85
mA
°C
Operating Case Temperature Range
Storage Case Temperature Range
Lead Soldering Temperature/Time
Relative Humidity (noncondensing)
* Rating varies with temperature.
Tstg
—
85
°C
260/10
85
°C/s
%
RH
—
2
Lucent Technologies Inc.
AGERE [ AGERE SYSTEMS ]
