ACT111A
Rev 0, 14-Feb-11
ORDERING INFORMATION
PART NUMBER
TEMPERATURE RANGE
PACKAGE
PINS
PACKING
TOP MARK
ACT111AUS-T
-40°C to 85°C
SOT23-6
6
TAPE & REEL
FRWE
PIN CONFIGURATION
6
5
1
2
FB
G
DIM
IN
BST
4
3
SW
SOT23-6
ACT111AUS-T
PIN DESCRIPTIONS
PIN NUMBER PIN NAME
PIN DESCRIPTION
Feedback Input for regulating LED current. The voltage at this pin is regulated to
0.1V. An external resistor is connected from this pin to ground to sense the LED
current.
1
FB
2
3
G
Ground.
Bootstrap pin. This provides power to the internal high-side N channel MOSFET
gate driver. Connect a 2.2nF capacitor from the pin to SW pin.
BST
Internal N channel power MOSFET source output pin. Connect it to one end of
power inductor.
4
5
SW
IN
Power supply input. Bypass this pin with a 10µF ceramic capacitor to GND, placed
as close to the IC as possible.
PWM signal input for dimming control. Apply PWM signal with amplitude greater
than 2V to this pin. The device is enabled as DIM pin open and disabled when it is
connected to G.
6
DIM
Innovative PowerTM
- 2 -
www.active-semi.com
Active-Semi Confidential―Do Not Copy or Distribute
Copyright © 2011 Active-Semi, Inc.