Actel MIL-STD-883 Product Flow
883—Class B
Requirement
Step
Screen
883 Method
1.
2.
3.
Internal Visual
2010, Test Condition B
1010, Test Condition C
100%
100%
100%
Temperature Cycling
Constant Acceleration
2001, Test Condition D or E,
Y1, Orientation Only
4.
Seal
1014
a. Fine
b. Gross
100%
100%
5.
6.
Visual Inspection
2009
100%
100%
Pre-Burn-In
Electrical Parameters
In accordance with applicable Actel
device specification
7.
Burn-in Test
1015, Condition D,
160 hours @ 125°C or 80 hours @ 150°C
100%
100%
8.
Interim (Post-Burn-In)
Electrical Parameters
In accordance with applicable Actel
device specification
9.
Percent Defective Allowable
Final Electrical Test
5%
All Lots
10.
In accordance with applicable Actel
device specification, which includes a, b, and c:
a. Static Tests
100%
100%
(1) 25°C
(Subgroup 1, Table I)
(2) –55°C and +125°C
(Subgroups 2, 3, Table I)
5005
5005
b. Functional Tests
(1) 25°C
(Subgroup 7, Table I)
(2) –55°C and +125°C
(Subgroups 8A and 8B, Table I)
5005
5005
c. Switching Tests at 25°C
(Subgroup 9, Table I)
100%
100%
5005
2009
11.
External Visual
Note: When Destructive Physical Analysis (DPA) is performed on Class B devices, the step coverage requirement as specified in Method 2018
must be waived.
8
ACTEL [ Actel Corporation ]
