欢迎访问ic37.com |
会员登录 免费注册
发布采购

ACTF480-9/479.5/TO39 参数 Datasheet PDF下载

ACTF480-9/479.5/TO39图片预览
型号: ACTF480-9/479.5/TO39
PDF下载: 下载PDF文件 查看货源
内容描述: 双通道IF滤波器DSB接收器具有恒定的群延迟 [two channel IF filter for DSB receivers with constant group delay]
分类和应用:
文件页数/大小: 3 页 / 45 K
品牌: ACT [ ADVANCED CRYSTAL TECHNOLOGY ]
 浏览型号ACTF480-9/479.5/TO39的Datasheet PDF文件第1页浏览型号ACTF480-9/479.5/TO39的Datasheet PDF文件第2页  
Tel : +44 118 979 1238  
Fax : +44 118 979 1283  
Email: info@actcrystals.com  
Characteristics of Channel 2  
Characteristic  
Min.  
Typ.  
Max.  
Units  
Center Frequency  
f
478.50  
479.50  
480.50  
MHz  
c
Insertion attenuation  
(Reference level for the following data)  
479.50 MHz  
α
--  
--  
25.0  
36.0  
26.5  
--  
dB  
MHz  
Pass bandwidth  
αrel3dB  
B3dB  
Relative attenuation  
αrel  
--  
--  
34.0  
30.0  
3.5  
2.3  
39.0  
36.0  
4.8  
4.8  
--  
dB  
dB  
dB  
dB  
461.50 MHz  
497.50 MHz  
430.00 ….449.00 MHz  
510.00 … 530.00 MHz  
Lower sidelobe  
Upper sidelobe  
--  
Reflected wave signal suppression  
0.13μs … 2.0μs after main pulse  
40.0  
45.0  
--  
dB  
Amplitude ripple (p-p)  
Group delay ripple (p-p)  
468.50 … 490.50 MHz  
461.50 … 497.50 MHz  
Δ α  
--  
--  
--  
0.6  
12  
1.2  
18  
--  
dB  
ns  
Δt  
-86  
ppm/K  
Temperature coefficient of frequency  
TCf  
iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling!  
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is  
connected to a 50Ω test system with VSWR1.2: 1. The test fixture L and C are adjusted for minimum insertion  
loss at the filter centre frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on  
the impedance matching component values and quality.  
2. Unless noted otherwise, specifications apply over the entire specified operating temperature range.  
3. The specifications of this device are based on the test circuit shown above and subject to change or  
obsolescence without notice.  
4. All equipment designs utilizing this product must be approved by the appropriate government agency prior to  
manufacture or sale.  
5. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for  
applications,processes and circuits implemented within components or assemblies.  
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.  
ISO9001: 2000 Registered - Registration number 6830/2  
Issue : 1 C1  
Date : SEPT 04  
For quotations or further information please contact us at:  
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK  
http://www.actcrystals.com