5. Performance
5-1. Maximum Ratings
Rating
Value
18
Unit
dBm
V
Source Power
DC Voltage
PS
VDC
Tstg
TA
0
Storage Temperature Range
Operating Temperature Range
-40 to +85
-40 to +85
℃
℃
5-2. Electronic Characteristics
Characteristic
Minimum
Typical
70.0
Maximum
Unit
Center Frequency
Insertion Loss (@70.00MHz)
fC
IL
BW1
BW40
--
--
--
MHz
14.5
16.0
dB
MHz
MHz
-1dB BW
-40dB BW
27.0
29.0
34.8
Pass band width
36.0
Ultimate Rejection
<Fc-18MHz
>Fc+18MHz
Amplitude Ripple
40
40
50
50
dB
0.8
1.2
10
dB
Phase Linearity (90%of 1dB Bandwidth)
5.0
degree
1.12
80
--
120
--
μs
ns
Group Delay at fC (@25 )
τC
--
--
Group Delay Ripple (fc+/-14MHz)
Δτ
Temperature Coefficient of Frequency
TCf
-70
ppm/K
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
C ACT 2012. All Rights Reserved.
○
NOTE:
1. The frequency fC is defined as the midpoint between the 3dB frequencies.
2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is
connected to a 50Ω test system with VSWR≤1.2:1. The test fixture L and C are adjusted for minimum insertion
loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on
the impedance matching component values and quality.
3. Unless noted otherwise, specifications apply over the entire specified operating temperature range.
4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence
without notice.
5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to
manufacture or sale.
6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
3
ACT [ ADVANCED CRYSTAL TECHNOLOGY ]
