SPECIFICATION FOR APPROVAL
REF :
PAGE: 6
20100112-A
PROD.
NAME
ABC'S DWG NO.
ABC'S ITEM NO.
BS0704□□□□F□-□□□
SHIELDED SMD
POWER INDUCTOR
Ⅸ﹒RELIABILITY TEST：
Test item
Specification
Test condition
More than 95% of the
terminal electrode
Shall be covered
Preheat : 155℃ / 4 hours.
Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent
Solder temp. : 235±5℃
Solderability
With fresh solder.
Flux : Rosin
Dip time : 5±0.5 seconds
Electrical oharacteristics shall Room temp.
-25 ℃
not change more
15 minutes
30 minutes
Thermal shock test
( Temp. cycle )
than ±20%
Room temp.
15 minutes
+105 ℃
30 minutes
Total : 50 cycles
Temperature : 40±2℃
Humidity : 90±5%
Time : 1000 hours
Humidity Test
Temperature : 105±5℃
Applied current : Per spec.
Time : 96 hours
High temp.
Resistance test
AR-001A
ABC [ ABC Taiwan Electronics Corp ]
