AAT3526/7/8
MicroPower™ Supervisory Circuit
with Manual Reset
Pin Descriptions
AAT3526, 3527, 3528 (SOT143)
Pin #
Symbol
Function
1
GND
Ground connection.
RESET
(AAT3527)
RESET output remains high while VCC is below the reset threshold
and remains so for a minimum of 150ms after VCC raises above the
reset threshold.
2
RESET
(AAT3526,
AAT3528)
RESET output remains low while VCC is below the reset threshold
and remains so for a minimum of 150ms after VCC raises above the
reset threshold.
3
4
MR
Manual reset active low input. A logic low signal on MR asserts a
reset condition. Asserted reset continues as long as MR is low and
for a minimum of 150ms after MR returns high.
VCC
Supply voltage (+1.2V to +5.5V). Due to extremely low operating
current, it is recommended to place a 10nF capacitor between VCC
and GND.
Part Number Descriptions
Part Number
AAT3526
Output Type
Reset Output Push Pull Active Low with Delay
Reset Output Push Pull Active High with Delay
Reset Output Open Drain Active Low with Delay
AAT3527
AAT3528
Pin Configuration
SOT143
(Top View)
4
VCC
1
GND
2
3
MR
(RESET) RESET
2
3526.2006.03.1.6
AAT [ ADVANCED ANALOG TECHNOLOGY, INC. ]
