SMD Chip Attenuator
The content of this specification may change without notification 08/28/2008
CHARACTERISTICS
Specification
Attenuation
Item
Condition
Size
Impedance
0~10dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
±0.05dB
±0.04dB
±0.04dB
±0.02dB
±0.05dB
±0.04dB
±0.04dB
±0.02dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
±0.03dB
±0.02dB
±0.02dB
±0.01dB
16, 20dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
±0.05dB
±0.04dB
±0.04dB
±0.04dB
±0.05dB
±0.04dB
±0.04dB
±0.04dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
±0.03dB
±0.02dB
±0.02dB
±0.02dB
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
0402
0805
1206
1612
±0.5%
±0.2%
±0.2%
±0.2%
±1.0%
±0.5%
±0.5%
±0.5%
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
±0.2%
±0.2%
±0.2%
±0.5%
±0.2%
±0.2%
±0.2%
±0.5%
±0.2%
±0.2%
±0.2%
Voltage of 2.5 times the rated voltage shall be applied for 5
seconds.
Short Time Overload
The attenuator shall be subjected to rated voltage for 90
minutes followed by a pause of 30 minutes at a temperature of
70±3°C. This constitutes 1 cycle. The cycles shall be repeated
for 1,000 hours.
Load Life
The attenuator shall be subjected to rated voltage for 90
minutes followed by a pause of 30 minutes at a temperature of
60±2°C with relative humidity of 90% to 95%. This constitutes 1
cycle. The cycles shall be repeated for 1,000 hours.
Moisture Load Life
Temperature Cycle
[-55°C 30 minutes-R.T. 3 minutes-+125°C 30 minutes-R.T. 3
minutes] The attenuator shall be subjected to 5 continuous
cycles.
Resistance to Soldering
Heat
The attenuator shall be immersed into the solder of 260±5°C for
10±1 seconds.
Distance between the fulcrums: 90mm
Bending width: 3mm
Substrate: Glass-Epoxy t=1.6mm
Substrate Bending
Solderability
The attenuator shall be dipped into the solder of 235±5°C for
3±0.5 seconds. A new uniform coating of solder shall cover
95% or more of surface being immersed.
A new uniform coating of solder shall
cover 95% or ore of surface being
immersed
Insulation Resistance
DC 500V for 1 minute
1000M Ω or over
±0.02dB
±0.005dB
±0.005dB
±0.005dB
±0.02dB
±0.005dB
±0.005dB
±0.01dB
±50ppm/°C
±50ppm/°C
±50ppm/°C
±50ppm/°C
Temperature
Characteristic
R.T. – R.T. +100°C – R.T.
Note: Impedance value and attenuation value shall be checked by DC measurement.
188 Technology Drive, Unit H Irvine, CA 92618
3
TEL: 949-453-9888 FAX: 9494538889
American Accurate Components, Inc.